RF Design & Optimization Engineer in Ohio [83398]

Education:

Master Degree in Engineering Management.

Courses of Interest: Antenna Design, Digital Communications, Digital Signal Processing, Financial Accounting, Managerial Finance, and Management and Organizational Behavior.

Bachelor Degree in Electrical Engineering

Experience Summary:

RF Design and Optimization Engineer

- Optimizing New Mexico market for efficiency and Capacity relief.

- Site Design and Candidate Evaluation for Utah Market.

- AMPS/ TDMA Frequency Planning for Idaho Market.

- Optimizing San Angelo market for efficiency and Capacity relief.

RF Design and Optimization Engineer

- New sites design

- Performing design of site location, antennas, base station type and tower equipment selection, site visits, propagation study, drive test analysis, zoning and regulatory support

- Generated preliminary RF designs for new sites and refine designs using full functionality of the PlanetEV propagation tool, including CDMA analysis, model tuning and drive test data. Incorporate the use of friendly site databases, zoning restrictions, regulatory related issues, handoff status, Link Budget analysis, RF interference to meet coverage objectives and capacity requirements.

- Ensured RF NEPA, FCC, and FAA compliance.

- Provided RF related Zoning and Planning Commissions testimonies

Request Information About This Candidate

_____________________________________________________________________________________________

Electrical Engineer in Louisiana [82657]

Experience Summary:

Electrical Engineer

- Temporary contract position.

- Integrating HMI controls screens for gas turbine generators.

- Applications include Wonderware, RS View communicating with Allen Bradley Control Logix PLC's.

Drive Tester

- Temporary contract position.

- Optimization of CDMA networks through drive testing.

Electrical Engineer

- Integrating control systems of offshore oil platforms and other process involved plants to existing or custom designed MMI (man-machine interface) via PLC (programmable logic controller).

- Programming ladder logic for many different models of PLC including GE, Allen Bradley, Modicon/Square D.

- Fluent with WonderWare, AB Control Logix, GE VersaPro, Fisher ROC.  Experience networking PLC's with other PLC's and MMI via both Ethernet and propitiatory networking methods.

- Included frequent travel to and from on-site locations for installations and troubleshooting.

Education:

BSEE

Additional Information:

Notable Courses Taken include:  RF Engineering, Communication System Design, Analog and Digital Filter Design, Digital Signal Processing, Audio Engineering, Classical Control System, Instrumentation Design and Analysis.

Request Information About This Candidate

_____________________________________________________________________________________________

E-911 Field Engineer in Maryland [78079]

Experience Summary:

E-911 Field Engineer

- Responsible for Implementing, programming and commissioning True Position (e911 LMU) Wireless Location Systems deployed at T-Mobile DC, VA, MD, CT NJ and NY Market.

- Installation of LMU radio into GSM Ericsson (RBS2102/2202/RBS2106/2206) cabinet in the DC market and Nokia (8000/9000) cabinet in the NY, CT and NJ market.

- Installation, Testing and commissioning the GPS/GSM down link antenna, use Trimble asset surveyor to collect GPS latitude and longitude and site survey items for above ground level determination. Performed T1 Loopback test from BTS to the NOC.

- Integrated and Commissioned LMU radio on line to communicate with True Position Switch.

- Performed extensive trouble shooting and also perform site surveys on each PCS communications cell site.

- Analyze test and feedback result to Field Manager.

Languages:

English and French

Education:

BS, Telecommunications

Request Information About This Candidate

_____________________________________________________________________________________________

Test Engineer in California [95213]

Experience Summary:

Test Engineer

- Implemented automated regression, stress and benchmark test for Cisco Routers/Switches

- Implemented automated ping test networking for Cisco Routers/Switches

- Programmed the flash card memory such as 32/64/128MB for Cisco Routers

- Supported test operators and debugged Cisco Routers/Switches at test line

- Implemented the manual automation test for Cisco Routers/Switches production test lines

Sr. Test Engineer

- Implemented IP network to deliver voice, video and data services

- Design/Implement the radio units 26GHZ, band 2, supports both 7 and 14 MHz channelization, integral 150mm lens-corrected horn antenna, 30 dBi gain, vertical polarization includes TNC cable connectors, requires wall mount or pole mount installation kit

- Implemented automated regression, stress and benchmark test for radio units 10 GHZ, 26GHZ, 39GHZ

- Implemented customer test plans, created test reports, document, track, debugged and provided on-site setup to support customer issues and problems

- Setup Frame Relay, ISDN, IP, DASS2, CES, FTP, Ethernet bridging, redundancy test

Request Information About This Candidate

_____________________________________________________________________________________________

Software Test Engineer in Washington [87024]

Experience Summary:

Software Test Engineer 3

- Responsible for performing Web/Black Box Testing of a brand new product Windows Live Search

- Executing tests on different platforms such as Win Xp, Mac OSX, Vista with IE 6.0/7.0 and Firefox 1.5 browsers

- Carrying out Test Planning and creating Test Cases even before the features are implemented

- Attending frequent meetings and conducting information for future features and components that will be released

- At all times communicating with PMs, Devs, Test Lead and the rest of the team

Software:

Test Studio, Product Studio, Basic SQL, Basic XML, Webrunner, Raid 4.5, Remote Assistance, Real VNC 4, Flash 7, Shockwave 8.5, Bugzilla db, Source Depot, Visual SourceSafe, VISEx, BBEdit, Tactics 2.01, Platform Builder, Hyper Terminal, Active Sync, Drive Image Pro, Symantec Ghost 7.0, Good user knowledge of Office 97/2000/XP, Office 11 for Macs, Intellitax Software, Adobe Indesign 1.0/2.0, Acrobat 5.0 PageMaker 7.0, Illustrator 9.1, Eudora 4.3 and Vantive 8.2

Languages:

Fluent in Russian, Spanish and English

Request Information About This Candidate

_____________________________________________________________________________________________

Test Engineer in Arizona [95349]

Summary:

Twenty years of total experience, mostly in the telecommunications industry, with many Fortune 500 companies.  This includes everything from SMT component level repair and testing, to system test/integration engineering to product/project management and supervising personnel.  This candidate is also proficient in technical writing/documentation as well. He is a veteran, with military training in RF from the U.S. Air Force in avionics communications, and was assigned to an aircraft maintenance squadron.

Experience Summary:

System Test Engineer- Contractor

Hardware level test and debug/repair of Xscale based PCB's.  Conduct functional and memory related testing/ loading of FPGA's and microprocessor chip sets to support an internal based system testing group- (Released product is for various external customer's  PDA's and Cellular handsets). Perform QA inspection of new incoming boards and correct solder component defects. Maintain status of PCB's and update PCB tracking database.

Request Information About This Candidate

_____________________________________________________________________________________________

Software Developer in California [95227]

Summary:

- More than seven years of experience as a software developer and test engineer in telecommunication and software tools industry.

- Highly skilled in working on various microprocessors and electronic design tools with C/C++.

- Experienced in all facets of project lifecycle development: From initial feasibility analysis and conceptual design through documentation, implementation, and user training/enhancement. Demonstrated analytical thinking during problem solving. Ability to isolate problems quickly and provide solutions.

- Ability of working in both small and large team environments.

- Ability of debugging and resolving problems.

- Knowledge in test equipment, test lab environment, telecommunications systems, and OSI layers.

- Distinguished team player with excellent communication skills.

Experience Summary:

Software Developer, CDMA Application Division

Port real-time C++ code from Green Hills Multi compiler to GNU 3.3.2 compiler

Upgrade CDMA applications from VxWorks 5.4 to VxWorks 6.1.

Convert PMC Base build files to make files.

Modify makefiles and loadbuild environment.

Assist on testing by debugging issues.

Participate in code review process.

Request Information About This Candidate

_____________________________________________________________________________________________

Consultant in Washington [86988]

Experience Summary:

Consultant (Contract)

- Providing expertise in Firmware for Bluetooth Wireless V1.2 and v2.0+EDR, in

- Bluetooth RF, Physical Channels, Physical Links, Baseband

- Bluetooth Inquiry, Paging and Connected States and sub-states, Encryption

- Bluetooth ACL links, SCO, eSCO, ASB, PSB, & streaming

- Bluetooth Link Controller (LC) & Link Manger Protocol (LMP)

- Bluetooth HOst Controller Interface (HCI)

- Doing Analysis of Broadcom Bluetooth 2037 chip

- Recommended advancement to Bluetooth lower layer stack

- Providing guidance to overseas third-party Bluetooth stack developers

Education:

Master of Engineering

Request Information About This Candidate

_____________________________________________________________________________________________

J2EE Applications Architect in Texas [86523]

Summary:

- Senior J2EE Applications Architect / Technical Team Lead (Consultant) with over 7 years of experience in all phases of software development life cycle, including information strategy planning, requirement analysis and prototyping, design, development, testing, debugging, performance tuning and production support.

- Extensive experience in design and implementation of Provisioning, Billing and CRM systems.

- Expertise in MVNO integration with various Ericsson Pre-Paid and Ericsson RBT hosted services for MMS, SMS, Content, Data, Provisioning, Billing, Reporting and CRM systems.

- Expertise in designing systems based on Object-Oriented Analysis/Design Methodologies specifically UML with Rational Rose.

- Extensive experience in design, development, performance tuning and testing of client-server applications, enterprise applications, Web applications and Web services using Load Runner, Jmeter, and YourKit Java profiler.

- Competency in designing and developing effective solutions to complex business problems using Java, C++.

- Core Domain Areas: Telecom, Mobile Solutions, Insurance, Ecommerce, Simulation.

- Expertise in development of software applications using Java, J2EE, J2ME, JDBC, Servlets, JSPs, EJBs (Session, Entity), Struts framework, Java Beans, JFC/Swing, RMI, XML, SOAP, WSDL, SAX/DOM, XSLT, Web Services, Axis, WebSphere, Web Logic, JBOSS, JUnit, C++, MFC, Windows CE, SVG, WML.

- Experience in using configuration management tools like Microsoft Visual SourceSafe, Concurrent Versioning System (CVS) and design Tools like Rational Rose, Microsoft Visio.

- Highly motivated experienced professional with excellent interpersonal and Communication skills.

Request Information About This Candidate

_____________________________________________________________________________________________

Technology Specialist in California [87083]

Experience Summary:

Contractor

Technology Specialist-Application Manager

- Directed customer’s design engineers in architecture, design, part selection and debugged along the way.

- Created schematic design review document, Signal Integrity guideline, FAQ documents and more

- Wrote schematic design review, signal integrity guidelines for FAEs and customers use worldwide.

- Debugged various system; on the area of Ethernet switching, MACs, PHYs, SERDES, System controller’s bridge[74xx,  IBM750, MIPS CPU bus, PCI-x/E, DDR/II, MAC GPIO i/f], SATA controllers [PCI/x/E to SATA-II] and ARM CPUs.

- Supervised 100+ Field App Engineers Worldwide to ensure that the team can effectively debug and understand customer systems from concept trough design and into production.

- Prepared technology seminars for customer’s design engineers

- Resolved complex problems to win strategic accounts as it relates to all aspects of demand creation for the company’s products.

- Assessed Prioritized levels of support ROI (Return on investment) for variety of projects. The primary goal was to help to win new designs and secure existing ones for the company’s line of high-performance switching products for the broadband communications market that enable next-generation networking and storage products.

- Was instrumental in increasing revenue from $15M to $60M+

- Maintained a high degree of technical knowledge and was recognized as outstanding engineer for demand creation design achievements

- Relayed issues/concerns to management and recommended effective solutions to max efficiency.

Request Information About This Candidate

_____________________________________________________________________________________________

Managing Director in New Jersey [84691]

Experience Summary:

Managing Director

- The company develops highly advanced multiplayer 3D games for handheld devices, unitizing technologies such as GPS, GPRS, Bluetooth, 3D etc.

- Responsible for the casino & betting business segment, exploring business opportunities within the wireless development of casino and gambling applications.

Product Manager

Responsible for products, partner relations and content deals, as well as implementing wireless solutions such as:

- Defined product specifications and successfully managed the development of the worlds first Java MIDlet betting solution over 3G ("lngen"). The project was co-funded and developed by the Swedish monopoly gambling partner "Svenska Spel".

- Successfully initiated and implemented a partner games portfolio for 3G devices (provisioning and billing integration with partner API).

- First world wide to launch a real time multiplayer solution for 3D games in C++ over 3G network, IR, and Bluetooth, including an OMA partner provisioning solution.

- Responsible for launching a partner hosted digital accessories application (wireless browser applications using OTA WAP-push for ring tones and images).

- Responsible for launching wireless browser applications (chatting applications over TCP/IP, structure development in XHTML).

- Initiated and implemented a Flash application over 3G (flash-games on Symbian enabled Macromedia Flash 5 OS terminals).

Education:

MBA - Master of Business Administration

Request Information About This Candidate

_____________________________________________________________________________________________

Lead Developer Architect in California [95614]

Summary:

- 8 years of experience in design, development and implementation of application software with complete life methodologies.

- Executed multiple projects using methodologies like Object Oriented Design (OOD) and Analysis (OOA), UML and Extreme Programming.

- Development skills using latest technologies including Java/J2EE/EJB/Servlets, XML, Weblogic, Apache/Tomcat, Oracle9iAS, Web Service, JMS, and SOA Architecture.

- Experienced in SQL, PL/SQL, Stored Procedures and Database Triggers in Oracle.

- Worked on different web Protocols viz TCP/IP, HTTP/HTTPS and WAP.

- Excellent server side and client side programming skills.

- Worked on Mobile devices like Pockect PC, Palm, Cellphones with WAP, XHTML, J2ME and WML technologies.

- Sun Certified JAVA Programmer.

- Experience in different domains viz Mobile Task Automation(Everypath Inc.) and Seven Networks), Oracle - CRM (Oracle corp.).

- Experienced in Client/Server n-tier architecture, J2EE, Oracle Work Flow, MVC, Struts and Three-tier development architecture.

- Used various IDEs Jbuilder, Oracle Jdeveloper, Eclipse, VI- Editor

- Worked with teams in different geographical locations and functional areas.

- Interacting with customers for maintenance, upgrade and solving technical issues.

- Excellent inter-personal and communication skills.

Education:

Master of Science (Physics, Integrated 5-year)

Request Information About This Candidate

_____________________________________________________________________________________________

RF Engineer in Florida [87173]

Experience Summary:

RF Engineer (Contract)

Responsible for pre-deployment testing and frequency mitigation for 900Mhz in Florida Market.  Tested cell sites for interference and pursued interferers using spectrum analyzer and yagi antenna.  Results reported using internal software tools.  Developed skills and knowledge of Agilent E4402B Spectrum Analyzer, Delorme Street Atlas, and data analysis.

Systems Engineer

Evaluates hardware and software components to be implemented in a Wireless ISP environment.  Responsible for network design and project management.  Conducts traffic analysis of Internet POP: evaluates contract compliance and usage for various network elements (including a burstable DS-3).  Set up network monitoring software.  Administers email for customers and staff.  Provides level two technical support to customers, installers and staff.  Setup routers and taught installation crew basic networking.  Evaluated and setup various security systems.  Developed skills and knowledge of security systems, data networking, network build-out, network monitoring, and training others.

Request Information About This Candidate

_____________________________________________________________________________________________

CDMA Handset Test Engineer in Texas [79521]

Test Experience:

- Created test plans, test cases, and test scripts based on software requirement documents and verified software operational functions.

- Executed test cases, reported issues into PVCS database and reran the test cases when issues resolved by software designers.

- Documented test results to test manager and members.

- Performed regression test with new software release.

- Completed test life cycle.

- Completed assigned test and supported other tasks as teamwork.

- Communicated with internal and external customers.

Experience Summary:

CDMA Handset Test Engineer (as Consultant)

- Perform Verizon CDG III Feature Test with Qualcomm QXDM and QCAT test tools.

- Write SMS test plan and execute SMS and EMS test cases.

- Verify Software Release Notes issues.

- Perform User Interface (UI) test.

- Report issues to Project Tracking System (PTS).

- Submit test result to product manager.

- Download new software with Product Support Tool (PST), and perform regression test.

- Use Agilent 8960 radio test set to verify RSSI issue.

- Use Spirent AirAccess C2K test tool to verify MRU issue.

Education:

BSEE

DoD Security Clearance

Bilingual: English & Mandarin

Request Information About This Candidate

_____________________________________________________________________________________________

Integration & Test Consultant in Texas [15356]

Experience Summary:

Consultant

- Prepared Acceptance Tests and Functional Test Software using Test Stand and Labview.

- Missile Interlocks, Relay Interlocker, Decoder, and Inflight Data Processing.

Consultant

- Development of Ultra Wide Band (UWB) radios and antennas and teamed with Tektronix for TE

- Rhode/Schwarz to develop a new generation of UWB equipment for manufacturer use.

- Military encrypted data transmission equipment development using Labview 7.0

- Electronic Warfare Counter Measures for JSF: Microwave and RF.

- Operations and Integration, Engineering Development: Verification and Validation.  Labview ATE

- Test Stand and Lab view test for IPOD Military version using Blue Tooth and IEEE 802.1 wireless PDR, CDR and Qualification of Aircraft Avionics Systems.

- Performance Requirements, Facilities Assets Selection and Coordination for Test Verification

- Simulation Equipment Design, Waveform Timelines and Test Reports

Education:

BSEE

Major: Electrical Engineering

Minors: Antennas & Microwaves

Request Information About This Candidate

_____________________________________________________________________________________________

Project Manager in Pennsylvania [87267]

Summary:

- A proven Project Manager and Leader with 17 years of experience coupled with strong technology leadership expertise.

- Six Sigma Total Quality Management (TQM) professional assurance and best practices.

- Dedicated to delivering a positive internal and external client experience.

- Business client relationships: Government, Aerospace, Telecommunications, Pharmaceutical, Medical, Energy, Education, Manufacturing, Retail, Software Technology,  Six Sigma  and Project Management training, (PMI).

- Legal: Obtaining rights of way, securing contract negotiations (both internal and external customers), letters of intent, settlements, project litigation and risk management.

- Project Management and cost containment experience in all business strata's emerging, mid strata and enterprise level initiatives to 30 million dollars. - Strategic Planning and Design of national and international Systems and Infrastructures.

- IT and Engineering Operations supporting 7x24X365 availability in a global setting.

- Network Infrastructures supporting Data, Audio Video and Voice Communications.

- Application Development supporting Microsoft Project, MS Access, Primavera 3 (P3), XtremePM, SAP, Tyler, PeopleSoft, Web interface and custom software utilizing CMMI methodology.

Experience Summary:

Project Manager

- Managing a 180 Million Dollar Project in conjunction with the PMO.  Largest spend in company history.

- Reverse engineer current Software Architecture and converting into XML Software Open Architecture SOA.

- Building a central Distributed BUS or CIM Common Information Model for all markets to include operations.

- Managing the vendors (Siemens- Minnesota and Areva) to meet operational considerations and allow for 400% growth in the business model.  Currently at 100,000 Megawatts on the grid.

- Construct a test bed for final acceptance.

- Build a brand new Data Center- Control room and upgrade the current one.

- Engineer the migration and synchronization of both data centers to spec.

- Track Risk and cost containment.  Mitigate issues and level resources.

- Present progress to Sr. Management

- Knowledge transfer to other Project Managers in SCADA, Day-Ahead Markets and Congestion Management.

Request Information About This Candidate

_____________________________________________________________________________________________

Field Test Engineer in California [87234]

Summary:

- B.S., Communications and Electronic Engineering, and Certified Audit Leader.

- Over five years of increasingly responsible positions determining and resolving ESD-related problems in Semiconductor, Hard Disk Drives, Flat Panel Display, and Electronic Manufacturing Environments.

- Over three years combined positions as Technical Sales and Support for the Electronic-Semiconductor and Telecommunications-CableTV Industries.

- More than two years developing new and potential business relations with customers worldwide, contacted over the phone, the Internet and traveled to the customer site to provide technical support, to promote products and services, to support the installation of the equipment and to improve business relations.

- Extensive Quality Control Practices in Manufacturing Environments.

- Fluent in English and Spanish Business Communications.

- MBA slated to complete in 2007.

Experience Summary:

Field Test Engineer

- Hired to work as Field Test Engineer testing new software builds on prototype mobile phones based on the CDMA Technology.

- Field tested software functionality on prototype cell phones.

- Traveled locally to strategic routes assigned to test the different type of signals.

- Performed data collection in form of call statistics, trouble shooting, error logging and providing call support.

- Used terminal computer based programs to support the data collection (Phoenix, Fast Trace, vTOTM, Universal DMV2 and other R&D Tools).

- Reported to the Field Test Group Manager.

Request Information About This Candidate

_____________________________________________________________________________________________

Senior Program Manager in WA [18948]

Current Experience Summary:

Senior Program Manager

- Contracted to manage from inception through completion the West Coast US rollout of new technologies for OSS/BSS/BSC including lab testing and FOA

- A separate project to resolve all data backup issues for OSS nationwide was also completed

- Totally responsible for timeframe, scheduling, budget, personnel, MOP creation, deployment, reporting, and successful program upgrade management for over 137 BSC sites throughout the network

Senior Project / Program Manager

- Managed AT&T Wireless Services/Cingular project - totally responsible for complete design, construction, and deployment of new combined Distributed Antenna System / 802.11a/b/g WiFi solution for SeaTac International Airport with 192 antennas and 167 Cisco switches, routers, and access points with 31 remote hub groups for indoor and outdoor coverage

- Managed AT&T/Cingular / Sprint / T-Mobile / Nextel / Verizon carriers, constructed new switching center and co-location cell-sites, including Nortel, Nokia, Ericsson, Motorola, Lucent, Telco, Powerwave DAS to provide service with over 45 miles of cabling and fiber backbone successfully completing this multi-million dollar project within budget and project schedule

- Analyzed, site visits, and created bids for RFP’s for Boeing and other major industry leaders

Install of Cingular’s first UMTS site

- FBI Top Secret Security Clearance

Request Information About This Candidate

_____________________________________________________________________________________________

Independent Java Consultant in California [86787]

Current Experience Summary:

Independent Java Consultant

Wrote "Water Balloon Drop" J2ME mobile game, available on Cingular and T-Mobile networks (and others internationally). Helped debug and port other games from BREW platform to J2ME. Helped conceive and design new games. Contributed to helping the general manager form a business strategy for success in the mobile gaming arena.

Request Information About This Candidate

_____________________________________________________________________________________________

Consultant in New Jersey [86192]

Summary:

Design and implement DSP AUDIO/ Telecom Algorithms. Strong analytical skills.  Software/ firmware requirements, design, code and test. Real Time Operating Systems such as Vx Works and TIs DSP BIOS.  Communications/ Echocancellation and Noise Reduction and Howling Elimination Algorithms. Speech, Data,  Packet loss Concealment, Sampling Rate Conversion, Psychoacoustics, Acoustic Echo-Cancellation / DFT/ Goertzel Filtering and Phase Locked / Costas  Loop.  Speakerphone Audio Conferencing, and Microphone Array Processing for Beamformers and Sound Localization.

Skills:

Experience of Fixed Point / Floating Point Processors. Development tools include TI DSP BIOS. Emulators /Debuggers, TI - XDS 510 JTAG. TI 54x TI-C8x Debuggers and the CODE COMPOSER STUDIO 2.2 for TI-C54x TI-C64x.  Clearcase. Many years of C and Assembler. Power PC. MPC 860 VxWorks / 8260. Analog Devices - ADSP-21xx. GL Communications Suite of Test Software. MS Visual Studio 6.0.  P/ SPICE.

Education:

MSEE (DSP)

BSEE, in Electrical Engineering

BS.c. in Physics

Request Information About This Candidate

_____________________________________________________________________________________________

ASIC Design/Verification Engineer in New Hampshire [81439]

Summary:

An accomplished ASIC/FPGA design engineer specializing  in ASIC design and verification flows with extensive experience in  C/C++, Verilog/VHDL RTL coding, synthesis and simulations, developing custom Perl/tcl scripts , techniques for design-for-test (DFT) JTAG and internal scan,  experience in  chip timing, scan and  layout issues.

Experience Summary:

ASIC Design/ Verification Engineer (contract)

- As a team member of the ASIC component design team his responsibility is on the network processor to verify/debug design by simulating test patterns for Schlumberger tester using the gate level netlist.  The network processor supports WAN and LAN applications range from OC-3 to OC-192  and secure network traffic at 10 GB/s.  The network processor's innovative Micro engine architecture that includes multi -threaded distribution cache architecture which enables pipeline features of the software.

- Write Perl scripts to automate running of the tests on a network of Linux machines.

- Run and debug chip level tests using NCSIM simulator and Vtran-vcd generated tesgtbench, nWave viewer and Debussy debugger.

- Resolve test mismatches quickly by working closely with the unit design engineers

Education:

M.S (Engineering): Microelectronics Systems Design

B.Sc. (Engineering) Honors: Electronic Engineering

Software Languages C (4.0), C++ (4.0), Visual Basic, (4.0)

Request Information About This Candidate

_____________________________________________________________________________________________

RF Optimization Team Leader in Florida [35677]

Experience Summary:

RF Optimization Team Leader

Team leader for the complete voice and high speed data optimization of a Huawei 450MHz CDMA2000 1xRTT cellular network for the country of Portugal (pop. 14 million). Phase 1 is 133 cell sites. Scheduling, coordinating and overseeing 3 drive test teams and optimization engineers. Complete configuration of the Drive Test equipment including the Qualcomm QCTest CAIT 3.0 settings, Cell Ref files, laptops, GPS's, configuration and associated cabling. Complete setup of the Actix Analyzer v4.1 SP6 including legends, road maps and cell ref files. Analysis of drive test data + performed network modifications to improve call quality and data throughput.  Modifications performed include Antenna additions and raises, downtilt changes, reorientations, Common Channel Power adjustments, Neighbor List adjustments, SearchWinA + N modifications as well as Tadd/Tdrop changes. Analysis, tracking and locating of an interfering transmitter using a Spectrum Analyzer and Yagi antenna.

Education:

Bachelor of Science in Engineering BSEE

Languages:

English, intermediate Spanish

Request Information About This Candidate

_____________________________________________________________________________________________

RF Microwave Engineer in Alabama [85758]

Summary:

- Advanced RF Circuit Designs, LF to 28 GHz In Lumped Constant, Microstrip, Coplanar, Stripline, Waveguide Structures. A Wide Variety Of Substrate Media, Covering SMT, Hybrid, Thin-Film, MMIC Technologies.

- Systems Design & Analysis For Space / Military Communications, Radar, EW/ECM Systems. Conceptual Design, Feasibility & Trade-Off Analysis, Design Criteria Development. RFQ / RFP Review, Proposal Preparation & Submittal.

- Design Of Automated RF Test Stations. Design / Develop / Write / De-Bug Software Code. Design Of Calibration, Normalization & Error Correction Routines. Design Major RF / Microwave LRU Test Fixtures Used In The B-1B, B-52 OAS Programs.

- Antenna Design (Hi-Q Phased Arrays, Slots, Patches, Homodynes), Test Site Calibration, Antenna Measurements, Range Equation & Path Loss Errors Analysis

- RF Failure Analysis, Component Qualification, Selection, Vendor Sourcing, Database Creation

Request Information About This Candidate

_____________________________________________________________________________________________

Associate Engineer in Virginia [75874]

Summary:

Two year of solid theoretical and practical knowledge of RF propagation, and telecommunication systems. Experience in Satellite Radio with a focus on radio frequency designs using propagation prediction software, site selection, drive test data processing, coverage footprint management, and RF interference. Excellent communications skills, good team player, and interested to learn new skills.

Education:

BS in Electrical Engineering  (BSEE)

Technical Courses:

Propagation and Fading in Mobile Radio Channels.

Architecture and Operation of Wireless Networks.

Computer aided design-using AutoCAD 2002.

Computer Skills:

Microsoft Office: Excel, Word, Power Point, and Visio.

MapInfo, AutoCAD 2002, Street Atlas, and EDX SignalPro design software for wireless communication systems.

Request Information About This Candidate

_____________________________________________________________________________________________

Independent Consultant in California [86640]

Summary:

Over 15 years experience in voice, data and wireless telecommunications management.  Has extensive experience in the areas of project management, product development support, capital and expense budget management, vendor management, contract negotiation, strategic planning and resource prioritization.

Experience Summary:

Independent Consultant / Contractor

Project management for a wireless service provider’s Information Technology department covering 11 states in the west area.  Was the team lead in managing the implementation of a new computer operating environment for approximately 14,000 internal users.  This project included both hardware and software upgrades / retrofits.   Coordinated the resources of six separate geographical desktop support teams to successfully meet project objectives.  Completed installation of, and transition to, the Microsoft Outlook e-mail system from Lotus Notes.  Created and implemented IT sales support processes for new wireless data products-including the 1XRTT launch, AirCard, and Treo.  Provided IT support to the sales and marketing department during product launch for new wireless applications and devices.  Managed the RFQ process to select a vendor for a handheld inventory device user trial and coordinated all application and user acceptance testing.

Education:

Bachelor of Science

Business Administration / Marketing